Western Horizon - Skanner 24 Gaff Cutter £15,950 (GBP)
[Home] [BoatsForsale] [SearchForBoats] [Archive] [ContactUs] [UsefulLinks]

Archive
Model: Skanner 24 Gaff Cutter
Price: £15,950 (GBP)
Year: 1998
Hull: GRP

Scroll down to see all 31 images.

Archive
Model: Skanner 24 Gaff Cutter
Price: £15,950 (GBP)
Year: 1998
Hull: GRP
LOA: 27' 0" (8.2m)
LOD: 24' 0" (7.3m)
Beam: 8' 2" (2.5m)
Draft: 2' 8" (0.8m)
Keel: Long
Rig: Gaff Cutter
Engine Type: Inboard
Engine: 10hp Yanmar
Fuel: Diesel
Location: Loch Sween

Designed by Michael Hawes and built by Skanner Yachts Limited, the Skanner 24 is a lovely traditional gaff rigged cutter built in GRP with teak decking.
Solidly built and with head turning classic looks she makes an excellent coastal cruiser with comfortable accommodation for two. She is classed as a 2/3 berth, the extra quarter berth is under the port side decking.
Her overall length is 27 feet with the bowsprit.
Her beam is aprox 8ft 3inches and her draft is 2feet 9inches.
Her sail plan is a gaff rig cutter.
Her ballast is a lead encapsulated keel. She was built in 1998, probably the last built before the demise of the company and not commissioned until 2001.
The price includes the custom built road trailer pictured.
The owner used this to tow her from Cornwall to Scotland with his 4x4. The decking has been recently fully stripped cleaned and relaid but a considerable amount of work is still required, particularly in the area of the cockpit to restore her to excellent condition after rain water ingress damage.


Accommodation:
The main cabin contains nav station, galley and two quarter berths.
A further quarter berth is under the port side decking. The heads compartment is forward with a large wet locker/hanging space in the forepeak
Galley:
Located to the right of the companionway the galley has a gimballed single burner stove and stainless steel sink with manually pumped cold water. The sink and stove can be covered to create a food preparation area
Sails:
Gaff main, staysail and headsail. Roller reefing to headsail and staysail.


Electrical System:
12V
Equipment:
Road trailer Anchor Assorted warps and fenders




Skanner 24 Gaff Cutter - Port side view

Skanner 24 Gaff Cutter - Bows

Skanner 24 Gaff Cutter - Long keel gaff cutter on road trailer

Skanner 24 Gaff Cutter - Below waterline

Skanner 24 Gaff Cutter - Below waterline

Skanner 24 Gaff Cutter - Stern view

Skanner 24 Gaff Cutter - Stern view

Skanner 24 Gaff Cutter - Rudder & prop

Foredeck -

Anchor locker - The woodwork on the deck around this locker has been redone since this photo was taken, as shown in the previous photo.

Bow roller -

Interior - view forward

Companionway - The woodwork on the locker has been redone since this photo was taken

View Forward - Showing new woodwork in cockpit

Side deck - starboard side. The woodwork on deck has been redone since this photo was taken

Side deck - starboard side. The woodwork on deck has been redone since this photo was taken

Cockpit -

Foredeck - Showing new woodwork on deck

Nav Station -

Galley and berth - starboard side

Nav & berth - port side

Nav station -

Galley - Stove covered

Galley - stove open

Berths -

Port berth -

Stdb berth -

View aft -

Heads - storage and wet locker / hanging space

Engine - access from cabin behind steps

Engine - access from cockpit

Archive
Model: Skanner 24 Gaff Cutter
Price: £15,950 (GBP)
Year: 1998
Hull: GRP
LOA: 27' 0" (8.2m)
LOD: 24' 0" (7.3m)
Beam: 8' 2" (2.5m)
Draft: 2' 8" (0.8m)
Keel: Long
Rig: Gaff Cutter
Engine Type: Inboard
Engine: 10hp Yanmar
Fuel: Diesel
Location: Loch Sween

Content © Western Horizon 2007-2019
Website © BlueWave Projects and Services 2015-2019